PintV Power Kit

DO NOT UPGRADE FIRMWARE！

DO NOT USE REFLOAT PACKAGE！

In stock ready to ship.

If you are new to crypto payment you can experiment it with this 1$ test payment link.

It is confirmed that the Pint V kit outperforms the PintS in power and torque and topspeed, if you have a Pint X or Pint and want that mini GT feel, this is the kit to go with.

Benefits of PintV Power Kit:

1. The PintV Power Kit is a drop in replacement upgrade for your onewheel Pint and Pint X, any firmware version will work.

2. It increases your Pint power from 1995w to 2800w(same as stock GT level power)

    It increase your PintX power from 2244w to 4200w. (same as GTV power)

3. If you choose to upgrade your Pint with the QUART 50S battery, it will further increase the power to 3500w, 

4. With the PintV upgrade, you will have more speed with field weakening, you can cruise at 20mph without pushback with Pint XV

5. Boosted uphills torque from 14.2N.m to 22.7N.m, together with the ATR function, the climbing ability is massively improved. 

6. The GTV kit comes with a drop in replacement ESC and a BMS and front and rear light and status light bar.

7. It also comes with all the tools needed for installation.

8. The software is already tuned and IMU calibrated, no need to config anything, just plug and play.

9. The PintV enables all kinds of aftermarket rails, because the Pitch angle offset is configurable.

10. The PintV doesn't require the ESC pair to BMS, it is 100% right to repair.

11. It can be easily installed in 20mins, even your mom can do it some say. 

12. The Charge only BMS comes with balancing function at the end of charge to keep cells healthy.

13.180 days hassle free warranty, we replace your esc+bms for free, but you will have to pay for the shipping back to our local warehouse.

14.Remain all original lighting functions, no compromises.

15.Faster speed with fIeld weakening tech, can go up to 20mph with no push back.

16. Configurable haptic buzz and pushback.

17. Redesigned motor plug enables a snug fit to prevent burnt motor plug issue.

 18. Better version of the gradient tracking (ATR)

19. Unlock 3rd party charger, cheaper hyper charger. recommend charge under 3A.

Q&A

Does it affect my battery range?

- The PintV enables you to ride much more aggresively, however, if you test the crusing range, the change in range is barely noticeable.

   Actually the PintV uses a more efficient power stage than stock(lower Rdson, less heat), under  the same riding style, the range will not be affected.

Does it affect my battery life?

- The PintV's power draw is within the limitation of the battery pack's performance. 

My Pint doesnt power on, can I use the PintV kit? 

- Yes, as long as your battery pack is healthy, you can test your battery pack with a multimeter, it must have more than 37.5V.

Can I use my original light bars?

- Nope, we supply our own lightbars included in the kit.

Can I use my Pint's stock bms?

- Yes, it will need some modification to solder a thick wire to bypass bms, we recommend you to just use the BMS we provided.

My Pint has a aftermarket battery pack, can I use the PintV?

-Yes, as long as your aftermarket battery pack works on the original BMS, it will work with the PintV.

 -CHI BATTERY QUART IS SUPPORTED

-Quart p42a will be limited to 3780w while the Quart 50S will be limited to 3465w.

Is the BMS smart? Can I monitor my cell level?

-Nope, it is a charge only BMS, it does a good job balance and charge your battery safely, it also has individual cell balancing indicator, if the light shows blue, that means that group of cell is balancing itself. 

We will sell a 84V battery module to take the PintV even further in 2025Q2, stay tuned! 

All right reserved. floatwheel 2024

The "VESC" is a trademark own by benjamin vedder.

The onewheel Pint is a trade mark own by Future Motion.

Floatwheel is in no way affiliated with the mentioned parties.